Construction and Operation
Installing
Servicing
The Business of Service
Washing Practice
Parts Catalog

Models: S-101, B-201, S-110, B-210, B-215, B-211, B-212

General Information
Removal of Stains & Films on China and Glassware
Service Qualities of Dinnerware
Type S-10 Dishwasher Mechanism and Washing Cycle
Operation of Dishwasher
Operating Cycle
Basic Assemblies of the S-10 Dishwasher Mechanism
Service Adjustment and Replacement of Parts
Operational Complaint Charts

Full size poster scanned at high resolution gives great views to zoom-in on.

Kitchen Cabinets and sinks,
Dishwashers,
Disposers,
Cooking Appliances,
Refrigerator/Freezers,
Automatic Washers,
Dryers,
Combination Washer/Dryer,
Air Conditioners,
Vacuum Cleaners,
Ice Cube Makers.

This document makes doing internet searches for vintage parts much easier as you will have the official KitchenAid part numbers.

GSD2800D
GSD2600D
GSD2200D
GSD900D
GSD600D
GSD400D

Service manual includes wiring diagrams. Parts section shows all parts and part numbers. Having the manufacturers part number for the part you need is essential for doing internet/eBay searches to locate these rare, no longer available parts. In many circumstances they can be found once you know the part number. This guide is essential for anyone who has any vintage Frigidaire Range.

Air Gap & Fill Tube
Control Panel
Cycle Description and Operation Charts
Detergent Dispenser Door
Latch Mechanism
Doorl Gasket
Door Springs
Pump
Drain Valve
Electrical Cord Reel
Evaporation Channel
Field Wiring Compartment
Fill Valve
Flow-Thru Drying Assy.
Ground Screw Indicator
Light Assembly
Inner Door Assy.
Latch Switches
Lower Door Baffle
Lower Front Panel
Motor
Outer Door Panel
Over Fill Control Switch
Program Switch
Rinse Agent Dispenser
SaniGuade Filter
Service Tips
Shaft Seal
Sheath Heater
Tank Seal Assembly
Thermostat & Thermal Protector
Timer
Timer Sequence Charts
Upper Rack Track
Upper Spray System
Wiring Harnesses
Wash Pump
Wiring Diagrams

Models covered:
18lb Washers: WWA9508P, WWA9500P, WWA9400P, WWA9300P, WWA8508P, WWA8500P, WWA8428P, WWA8420P, WWA8408P, WWA8400P, WWA8375P, WWA8364P, WWA8360P, WWA8305P, WWA8330P, WWA8314P, WWA8310P, WWA8300P, WWA8000P

14lb Washers: WWA7400P, WWA7350P, WWA7300P, WWA7050P, WWA7060P, WWA7030P, WWA7000P, WWA5500P, WWA5400P, WWA5000P

Portable Washers: WWP1020P, WWP1023P, WWP1150P, WWP5300P

KDC-14
KDS-14P
KDI-14P
KDC-14P

Section No. 1—Wringers
1-a—Instructions for Servicing Model 80 Wringer
1-b—Instructions for Servicing Model 90 Wringer
1-c—Instructions for Servicing Model A Wringer
1-d—Instructions for Servicing Model F, 15, 25, 10, New 10, and 110 Wringers
1-e—Instructions for Servicing Model 30 Wringer
1-f—Instructions for Servicing Model 18 Wringer
1-g—Instructions for Servicing Model 32 Wringer
1-h—Instructions for Servicing Model 108 Wringer

Section No. 2—Power Units
2-a—Instructions for Servicing Model 80 and 90 Power Units
2-b—Instructions for Servicing Model A, 30 and 32 Power Units
2-c—Instructions for Servicing Assem. 3431 Power Unit for Models F, 15, 25, 10, 110, N10, 108
2-d—Instructions for Servicing Assem. 3905 Power Units for Model 18 and 19

Section No. 3—Center Assemblies
3-a—Instructions for Servicing Model 80 and 90 Center Assemblies
3-b—Instructions for Servicing Model A, 30, and 32 Center Assembly 3272
3-c—Instructions for Servicing Model F, 15, 25, 10, 110, N10, 18, 108 Center Assemblies
3-d—Gyratators—All Models

Section No. 4—Multi-Motors (Maytag Gas Engine Wringer Washers)
4-a—Instructions for Servicing Model 82 Multi-Motor Assem. 3023
4-b—Instructions for Servicing Single Cylinder Multi-Motor Models 92, B, 31, 33, G, 11, 16, 26, 111, 19.
4-c—Instructions for Servicing Twin Multi-Motor Models 33, 11, 111, 19, 109, EM, JM, NM, RM, KM.

Section No. 5—Ironers
5-a—Instructions for Servicing Model F Ironers

Section No. 6—Labor Charges and Special Instructions

6-a—Schedule of Labor Charges
6-b—Instructions for Refinishing Maytag Washers
6-c—Correct Use of Maytag Special Tools

Section No. 7—Service Instructions for Model E, J, N, and R
7-a—Instructions for servicing Wringer
7-b—Instructions for servicing Power Unit
7-c—Instructions for servicing Center Assembly
7-d—Miscellaneous Instructions and Tools


Supplemental Service instructions for models E, J, N, E2 and N2
Service Instructjions for New Style Wringer Drive
7-e—Service Instructions for Model R

Service Instructions for the Wico Magneto Model FW-1718, For Maytag Twin Cylinder Mutli-Motors